威尼斯人官网

Welcome to the official website of Sean CNC Cutting Machine
18953485859 National consultation hotline: 18953485859
Dezhou Xi'en CNC Equipment Co., Ltd.
威尼斯人官网

Address: 5886 Dongfanghong East Road, Dezhou Economic and Technological Development Zone

Phone: 18953485859

Fax: 0534-2317661

Email: 631364540@qq.com

company 威尼斯人官网
What is the meaning of flame cutting and plasma dual use of CNC cutting machine
18953485859(微信同号) Order hotline: 18953485859 (same number on WeChat)
product description

What are the configurations of the CNC dual-purpose cutting machine? What is the difference in the operation of the dual-purpose CNC cutting machine ? Talking about the meaning of the dual-purpose configuration of the CNC cutting machine, that is, combining flame cutting and plasma cutting to achieve the dual-use requirements of flame and plasma cutting.
Let's first understand the applicable scope of CNC flame cutting machine. CNC flame cutting machine is mainly used to cut the thickness of common carbon steel plate 8mm-180mm workpiece. Then the thermal deformation of the workpiece with a thickness of 0.1mm-5mm is more severe. Then at this time, you must consider buying a CNC cutting machine with a 60A plasma power supply. What about the cutting range: CNC plasma cutting machine is mainly used for non-ferrous metals (such as stainless steel, copper, aluminum, etc.) that cannot be cut by ordinary carbon steel plates and flame cutting machines. The bevel of the plasma is not very obvious when cutting thin plates (such as workpieces below 7mm), so the thicker the workpiece, the larger the bevel. This is related to the choice of plasma power supply (domestic plasma power supply and imported plasma power supply have The difference is that there is a difference between ordinary plasma power and fine plasma power), and slag and burr are not the same. In fact, the flame CNC cutting machine refers to a flame cutting torch fixed on a CNC cutting machine of any structure. The CNC system is used to control the direction of the cutting torch, when to "fall off the knife", when to stop, and along which route to cut. Cutting. The fuel of the flame can be industrial oxygen with acetylene or propane. The former has high purity, and more choices for users.

I want to buy
Ranch
Copyright © 2019 Dezhou Xi'en CNC Equipment Co., Ltd.® All rights reserved Power by DedeCms