威尼斯人官网

Welcome to the official website of Sean CNC Cutting Machine
18953485859 National consultation hotline: 18953485859
Dezhou Xi'en CNC Equipment Co., Ltd.
威尼斯人官网

Address: 5886 Dongfanghong East Road, Dezhou Economic and Technological Development Zone

Phone: 18953485859

Fax: 0534-2317661

Email: 631364540@qq.com

威尼斯人官网
How to maintain the multi-head straight CNC flame cutting machine everyday?
浏览次数: Time: 2019-09-23Browse times:
If the straight CNC cutting machine is used without maintenance for a long time, its working efficiency and product quality will be reduced, and the machine will eventually be damaged due to damage. Therefore, the daily maintenance has a great relationship with the life and performance of the equipment. CNC cutting

数控 切割机如果使用设备长时间不保养,它的工作效率和产品质量都会有所下降,最终机器损坏导致机器被淘汰。 If the straight CNC cutting machine is used without maintenance for a long time, its working efficiency and product quality will be reduced, and the machine will eventually be damaged due to damage. Therefore, the daily maintenance has a great relationship with the life and performance of the equipment. How to maintain the CNC cutting machine? Texas Sean CNC equipment tells you
H-beam production line equipment CNC cutting machine daily maintenance matters are as follows:
1. Every working day must clean up the dirt on the machine tool and the guide rails. When the bed is kept clean, turn off the air source and power supply and empty the residual gas from the machine tube.
2. The power will be turned off if you leave the machine for a long time.
3. Observe the machine's horizontal and vertical guide rails and rack surfaces or no lubricant to keep them well lubricated. Weekly care and maintenance: 1 Fully clean the machine every week, cleaning the horizontal and vertical guide rails, driving gears and racks, and filling them with oil. Check the normal work of horizontal and vertical rubbing railway, if not replaced in time.
4. Check all cutting torch pines and clean up the ignition of garbage to keep the ignition normal.
5. Inspect and damage the plasma cutting nozzle and electrode, if it is necessary to replace the electrode tip and.
Dezhou Xi'en CNC Equipment Co., Ltd.'s main business: CNC cutting machine, CNC plasma cutting machine , CNC flame cutting machine, CNC intersecting line cutting machine, CNC multi-head straight cutting machine, portable CNC cutting machine, cantilever CNC flame cutting machine, Desktop CNC Plasma Cutting Machine

Ranch
Copyright © 2019 Dezhou Xi'en CNC Equipment Co., Ltd.® All rights reserved Power by DedeCms