威尼斯人官网

Welcome to the official website of Sean CNC Cutting Machine
18953485859 National consultation hotline: 18953485859
Dezhou Xi'en CNC Equipment Co., Ltd.
威尼斯人官网

Address: 5886 Dongfanghong East Road, Dezhou Economic and Technological Development Zone

Phone: 18953485859

Fax: 0534-2317661

Email: 631364540@qq.com

威尼斯人官网
CNC cutting machine manufacturer introduces the equipment's back cutting function
浏览次数: Time: 2019-03-21Views :
NC cutting machine factory direct introduction introduces the back cutting function of NC cutting machine. During cutting, the speed is just one reason. The hub is what kind of spare parts you use. The control system of the existing CNC cutting machine is the same as the track storage method.

CNC cutting machine factory direct introduction of back cutting function
        In CNC cutting machine , cutting speed is just one reason. The hub is what kind of spare parts you use. The existing CNC cutting machine control system generally uses the method of trajectory storage to implement the retraction processing, that is, the trajectory storage space is generally used in the system to store the processing trajectory data that has been executed. The analysis of the stored processing trajectory is performed when the retraction processing is performed. Data is returned in the same way. This method is currently widely used. NC flame cutting machine is the main equipment for metal plate processing. Users can control the running trajectory of the cutting torch and related devices by programming the NC processing program, so as to realize automatic cutting. It is actually a NC machine tool, and its processing tool is flame. Torch or plasma torch. When this happens, the operator is required to suspend automatic processing, and use the method of back processing to retract the cutting gun to the front of the unpenetrated section along the original processing path, and then start processing to restart the non-penetrated section. Cutting. Therefore, it is basically OK to choose accurate spare parts and then adjust according to the indicated speed.
Because there may be problems such as program jumps, reincarnation, subroutine calls, and flame radius compensation in the processing program, it is often difficult to realize the rollback processing length according to the processing program. Which CNC cutting machine is better? Dezhou Xi'en CNC Equipment Co., Ltd.
  
The height adjustment can indeed control the slope. Currently, the arc pressure automatic height adjustment device is mainly used. Generally, the right side of the forward direction is the workpiece side, and the left side is used as waste.
Generally, when CNC flame cutting machine adopts flame cutting , due to factors such as unevenness of the processed plate, insufficient cutting gas pressure, and unfair setting of processing parameters, etc., the board cannot be penetrated in an uncertain section. As a result, automatic cutting cannot be completed. You can experiment by cutting the ring, so that you can basically ignore the factors of the cutting platform and torch.
The main products of Dezhou Xi'an CNC Equipment Co., Ltd. are: CNC cutting machine, CNC intersecting line cutting machine, plasma cutting machine, CNC flame cutting machine, gantry CNC cutting machine, desktop CNC cutting machine, special-shaped pipe cutting machine, infinite rotary groove CN, such as cutting machines and robot automation tooling equipment, will produce various large-scale, precision, high-speed CNC equipment systems and functional accessories according to the actual needs of customers.

Ranch
Copyright © 2019 Dezhou Xi'en CNC Equipment Co., Ltd.® All rights reserved Power by DedeCms